The clamp on camper tie-downs like # HSSF make a more secure and stronger connection than the stake pocket ones like # TDSF. Since they "grab" around the bed rail.
For the hardware use # TDHP. view full answer...
Since Curt does not have a universal style fifth wheel rail kit for your 1999 Chevy C1500 you would want the part # RP30035 which is a universal kit that fits your truck and will work with the Curt E16 hitch part # C16115 that you interested. With these two items you'd be ready to tow a fifth wheel trailer. view full answer...
The Equa-Flex Cushioned Equalizers # LC145546 that includes the 4 wet bolts has greaseable pivot points. This means you can replace the lower bolts that hold the pivot arms in place and replace them with the 4 wet bolts. This kit is rated for 5,000lb to 8,000lb trailer applications.
The Equa-Flex Cushioned Equalizers # LC279688 does not have greaseable pivot points and is rated for 6,000lb to 8,000lb trailer applications.
Beyond those differences these are the same size with a 4" bolt... view full answer...
The Draw-Tite trailer hitch, # 75033, will fit the 1998 Chevy C/K. The Draw-Tite trailer hitch, # 75037, will fit the 1995 Chevy Suburban. But they are not interchangeable. The hitches are designed to fit the construction and shape of specific vehicles, so these two hitches have unique designs and require specific mounting points on the vehicles they were designed for.
They do share some similarities. Both are Class III hitches with 500 pounds of tongue weight capacity and 5,000 pounds... view full answer...
Part # C15325 has a maximum gross trailer weight capacity of 16,000 lbs and 17,000 when using weight distribution. The tongue weight capacity is 2,400 lbs and 2,400 lbs when used with weight distribution. This hitch is designed to be used on trucks without a 10 inch step bumper.
This is a Class V hitch and has a 2 inch receiver opening.
Another Class V hitch that may work for you if your truck has the 10 inch step bumper is part # C15317. This has the same characteristics as the # C15325,... view full answer...
Since you have disc brakes on your trailer you must use a disc brake actuator like part # HBA16.
The problem is that with an actuator like part # HBA-12, it will not provide enough pressure to actuate the brakes. The maximum output pressure for the # HBA-12 is 1,200 psi while the maximum pressure for the # HBA16 is 1,600 psi. view full answer...
We currently have two front mount trailer hitch receivers for your 1996 Chevrolet K1500, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65005 and the Curt Front Mount Trailer Hitch Receiver part # 31042. They both have a 9,000 lb line pull and 500 lb vertical load weight capacity. They also both install using three holes on each side.
The main difference between them is that the Curt hitch hangs down more. This means it will be more visible but it also means that if you have... view full answer...
A standard bumper looks like a regular old bumper that goes straight across at the top and bottom and might have a cut out in the center for a license plate but the cutout does not drop below the bottom of the bumper.
A deep drop bumper will have the cut out in the middle but drops below the bottom of the bumper (at the center) so that it angles up from the center to the outer edges of the bumper. I have included a picture that better illustrates this.
For models with the standard bumper... view full answer...
The main difference between Draw-Tite trailer hitches # 75033 and # 75099 is the placement of the receiver tube on the cross member. On 75033 the receiver is attached to the rear part of the cross member. On 75099 it is welded below the cross member so that the cross member will not be visible. I have included a picture showing the hitches next to each other for a better visual. Either hitch will fit and they have the same specs. It is just a matter of how you want it to look. view full answer...
As long as your 1978 Chevy C30 has a 4-way installed on it already you'd be set with just the Curt Triflex part # C24VV and the install kit part # ETBC7 which converts the 4-way to a 7-way and comes with everything needed to install the controller. view full answer...